Nodular Iron 28 spline Eaton True Trac Center Section 9" Ford with US Gear

Description

Nodular Iron 28 spline Eaton True Trac Center Section 9" Ford with
US Gear ring & pinion
,  Assembled.
ALL NEW UNIT.
The Center Section will be Assembled and set up by Professionals.
Nodular Iron Gear case and Nodular iron Stock size Pinion Support.
CHOOSE
9 inch Ford US GEAR 8620 Street Series Ring & Pinion
(ratios 325, 350, 370, 389, 4.11 or 4.30)
.  US Gear is the only aftermarket ring & pinion manufactured in the USA.
2.89" OD Bearing size x 1.78
" ID bearing surface. nodular iron Daytona pinion support
.
CHOOSE
New Rear End Yoke   1310 series (3 7/32" wide with 1 1/16" caps), 1330 series ( 3 5/8" wide with 1 1/8" caps) or 1350 series ( 3 5/8" wide with 1 3/16" caps)  rear end yoke .
31 spline 9 inch Ford Eaton True Trac Carrier, specifications and description below.
EATON Truetrac
​The Detroit Truetrac is a helical-gear style performance differential that maximizes wheel traction and enhances driving and handling characteristics.
Operation
The Truetrac operates as a standard or open differential under normal driving conditions, allowing one wheel to spin faster or slower as necessary. When a wheel encounters a loss of traction or the terrain changes, the gear separation forces take effect and transfer torque to the high-traction wheel. The helical-shaped gears mesh with increasing force until wheel spin is slowed or completely stopped. When the vehicle exits the low traction situation, the differential resumes normal operation.
Performance
Operation of the Truetrac is smooth, quiet and automatic. The unit will engage without any driver knowledge or action required. It also has no wearable parts and requires no maintenance, meaning less time in the garage and more on the road.
The Eaton Detroit Truetrac is a very versatile differential that can enhance traction in a variety of vehicles.  Units are currently available for front- and rear-axle applications.  Below is a list of common uses:
Daily street-driving cars, trucks and SUVs
Tow vehicles
Off-road or trail rigs
High-horsepower racing vehicles
RVs/Motor Homes
Utility Vehicles
Landscape Trucks
Walk-in Vans
Package includes: PEM nodular iron case, iron Daytona
pinion support, pinion bearings & races, pinion bolts, pinion depth shims,
pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket and u-bolts for yoke.
We will build this center section after you verify the ratio of ring & pinion and the yoke series you want.
SHIPPING via UPS Ground in the 48 States US or Speedee Delivery in the upper Midwest.
s
hipping info  636 / 629 6200
Disclaimer.
Warning! Auto racing is a hazardous sport. No warranty or guarantee is made or implied regarding any racing product sold by Performance Engineering and Manufacturing, LLC. User assumes all risks.
We will ship using Ground Services and will send a Tracking/Delivery Confirmation Number after shipped.
WARNING: Cancer
And Reproductive Harm-
www.P65Warnings.ca.gov